|
|
Analysis of manufacturing of component by elastoforming technology
Lorenc, Tomáš ; Řiháček, Jan (referee) ; Peterková, Eva (advisor)
In this thesis, processed within the master's degree is the analysis and proposals for modification of production stagnation ribs aircraft L-410. The part is made of aluminum alloy D16. More specifically, it is a 0.8 mm thickness sheet, which after the milling of the blank molded in the basic non-rigid tool by Guerin. After analyzing the entire manufacturing process and the determination of the critical points due to a series of tests carried out were evaluated possible variants production innovation. Proposed changes and their optimization can reduce the labor intensity deleting some time being necessary preparatory and finishing operations manual. It also increases the repeatability and streamline current production panels.
|
|
|
Searches press brakes
Volejníček, Martin ; Bilík, Martin (referee) ; Pavlík, Jan (advisor)
The goal of my thesis was to create an integrated classification of press brakes. Introduce advanced press brakes and their basic specifications. Bending is a very common way of forming. Production bent part of a waste-free and economical. Modern hydraulic press brakes allow quick and precise production. Automated bending cells achieve high productivity.
|
|
| |
|
|
Formability of Thin Steel Sheets Coated with Anodized Aluminum
Hušek, Martin ; Suchánek, Jan (referee) ; Spišák,, Emil (referee) ; Dvořák, Milan (advisor)
Thesis deals with the design of the technological process of anodic oxidation (creating elox coating) on aluminium film in the system steel-aluminium-elox, with the findings of characteristics of this system, comparing with the contemporary knowledge and practical utilization of this system in practice. My thesis in the teoretical part describes creating of anodic oxidation (elox coating) and the process of bending and stretching the sheet. Theoretical aspects of interaction among elox finish, process of bendings and process of stretching are implemented in the experimental part and they are supported by identified knowledge and results. The practical part is focused on improving adhesion, designing and constructing a multifunctional bending product for testing resistance of the finish applied on a tested product. Under the terms of determination distributing deformation and tension in bended coated plate, this plate is tested by statistic analysis with the help of the Finit Element Method (FEM) in the programme ANSYS. The experimental part compares discovered results of each experiment in the system steel – aluminium – elox with the results of aluminium plates with elox finish, stainless plates and steel plates with aluzinc.
|
|
|
Influence of aging on sandwich materials properties
Smékal, Aleš ; Löffelmann, František (referee) ; Klement, Josef (advisor)
The first part of the master’s thesis deals with sandwich materials. Starting with composition of parts which the sandwich panel is made of. The thesis continues with loading distribution and testing of entire sandwich panel. The impact of environment is considered as well. The second part is its goal – determine degradation of the properties of sandwich panels with metal sheets and core after 15 years aging in the common atmosphere and aging in moistheat and salt environment by experiment.
|
|
|
Technology expanding pipes into tube sheet
Podstata, Jan ; Císařová, Michaela (referee) ; Štroner, Marek (advisor)
The project developed within the Bachelor's degree program in Engineering Technology presents literary research in the field of tubing expanding in the tubing. There have been known several possibilities how to roll the tube from the history as well as new modern ways. The work includes an analysis of the types of joints and their characteristics. The openings in the tube and the ends on the tube must be adjusted and of particular tolerance. There are also several types of tools that can be used to roll the tube. The tool is chosen according to the type and the position of the joint.
|
|
|
STUDY OF FORMABILITY OF COATED SHEETS FROM THE PLASMA CHEMICAL PRETREATMENT OF SURFACES
Schwarzer, Emil ; Šanovec, Jan (referee) ; Rusz, Stanislav (referee) ; Dvořák, Milan (advisor)
Theoretical part PhD thesis describes bending of sheets especially with a small bend radius and the distribution of deformation and describes the parameters of bent sheet. As the test sheets were treated by cataphoretic coating is this method described together with pretreatment of sheet. The practical part is focused on the principle multi-jet plasma system and treatment of the steel surface and examines the bent surfaces of the steel sheets with different variants of applying the coating. Selected samples are bent on the multifunction graduated bending jig and subjected to the Erichsen test and deduced results using plasma system and without the use of plasma system. In the experimental part were examined samples treated by multi-jet plasma system and subsequently bent on the multifunction graduated bending jig. Compares the results of individual experiments in system steel – base coat – plasma – topcoat. And also compares mutual combinations of various kinds of modifying the surfaces of steel samples with different coatings. Selected samples were tested for tensile test and the results were processed from this test. For selected samples was calculated hardening exponent. Another experiment consists in applying a circle at equal samples and subsequently the samples were bent under a defined radius and were determined tensile and compressive deformation. Samples of sheets were then embedded in the resin and then examined under a microscope, where they were divided into several categories and was determined optimal composition multi-jet plasma system for selected samples and the specific coatings on sheet plate with a maximum adhesion of the coating to the steel base. Selected measured values were subjected statistical control.
|
|
|
Analysis of manufacturing of component by elastoforming technology
Lorenc, Tomáš ; Řiháček, Jan (referee) ; Peterková, Eva (advisor)
In this thesis, processed within the master's degree is the analysis and proposals for modification of production stagnation ribs aircraft L-410. The part is made of aluminum alloy D16. More specifically, it is a 0.8 mm thickness sheet, which after the milling of the blank molded in the basic non-rigid tool by Guerin. After analyzing the entire manufacturing process and the determination of the critical points due to a series of tests carried out were evaluated possible variants production innovation. Proposed changes and their optimization can reduce the labor intensity deleting some time being necessary preparatory and finishing operations manual. It also increases the repeatability and streamline current production panels.
|
|
|
The Development of the Roof Structures from Antiquity to the 20th Century
Urych, Jan ; Jarošová, Markéta (advisor) ; Czumalo, Vladimír (referee)
This diploma thesis deals with the historical development of roof structures and materials used in their construction. The development in time can be delimited from the antique Rome and Greek up to the introduction of modern reinforced concrete structures in the twentieth century. The paper focuses not only on the roof structures and their types, but also on the appropriate roofing. In addition, it highlights the advantages or disadvantages of the individual types of structures, their elements and other relevant things. It is also devoted to the typology of the materials, their development and correct processing. The main aim of this work is to summarize the information and to outline the development from the earliest times up to the present.
|
|
| |
guest ::
